320 MFD START CAPACITOR: Round 125 V start capacitor rated 320 µF (288-352 µF) that gives the motor extra starting torque on 115 V, 60 Hz refrigeration compressors.
FOR NF AND TFS COMPRESSORS: Listed by Danfoss for NF and TFS series compressors, such as the NF7CLX, in domestic and light commercial refrigeration.
1/4 IN. CONNECTIONS, NO BLEEDER: Round case with 1/4 in. connections. Danfoss lists this capacitor with UL approval and without a bleeder resistor.
REPLACE WHEN FAILING: A weak start capacitor shows as a compressor that hums but will not start, a breaker that trips at start-up, or a bulging or leaking case.
VERIFY BEFORE ORDERING: Danfoss part number 117U5022 for 115 V, 60 Hz systems that call for a 320 µF start capacitor. Please verify your compressor model and the original capacitor before ordering.
Weight : 0.22 LBR
Model : 117U5022
UPC-EAN :
Specifications
- Model: 117U5022
- Type: Start capacitor, round
- Capacitance: 320 µF (288-352 µF)
- Rated voltage: 125 V
- System voltage / frequency: 115 V, 60 Hz
- Bleeder resistor: No
- Approval: UL
- Connections: 1/4 in.
- Compressor series: NF, TFS (for example NF7CLX)
- Body size (approx.): 3.15 in length x 1.54 in diameter
A start capacitor works only while the compressor motor starts and is then taken out of the circuit by the start relay. It is used, for example, with the NF7CLX (LBP/MBP, R404A/R507, 115 V, 60 Hz). Disconnect power and discharge the capacitor before replacing it. Please confirm your model and electrical supply before ordering.


