Full Gauge VC-108 Log Electronic Controller for vaccine refrigerators, 10 temperature sensors, 8 relays, 12Vdc

Temperature controller specially designed to ensure proper refrigeration of highly sensitive products such as vaccines and medications. It features a reinforced and redundant safety system that supports backup power and control, automatically activated in case of emergency. Key features include:

nbsp; nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;Power supply monitoring (15 to 265Vac)

nbsp; nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;Emergency system battery charge monitoring

nbsp; nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;Support for auto-dialer activation in critical situations

nbsp; nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;Internal memory capable of storing parameters and events for up to 10 years

nbsp; nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;Sensor redundancy with backup probes that activate upon reading failure

nbsp; nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;Temperature alarm simulation to test and validate the safety system response

nbsp; nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;Four security levels for configuration access

nbsp; nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;Maintenance time tracking

nbsp; nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;Connectivity with the Sitrad PRO supervisory system

The VC-108 Log supports up to 10 temperature sensors and manages loads via 8 relay outputs. It includes a USB port for exporting data, importing and exporting presets, and updating the device.

It is available in PCB (Printed Circuit Board) format, with a graphic display interface and 7-key panel for direct integration into the equipment.

nbsp;

TECHNICAL SPECIFICATIONS:

Power supply: 12Vdc 10%

Maximum consumption: 5.84W

Operating humidity: 10 a 90% UR (without condensation)

Maximum supported voltaje: 20Vdc

Control temperatura: -50C a 105C / -58F a 221F

Temperature resolution: 0,1C (0,1F) across the range

Temperature sensors:

nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp; S1 and S4: ambient sensors

nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp; S2: evaporator sensor

nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp; S3: condenser sensor

nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp; S5 to S10: drawer sensors

nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp; nbsp;(all SB70 type sensors)

Power supply monitor: 15 a 265 Vac

Digital input: I1: door sensor (N/A logic)

Output to relay:

nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp; O1: compressor - 16 A / 250 Vac

nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp; O2: defrost - 16 A / 250 Vac

nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp; O3: fan - 16 A / 250 Vac

nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp; O4: lamp - 5A / 250 Vac

nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp; O5: inverter - 5A / 250 Vac

nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp; O6: power switch - 5A / 250 Vac

nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp; O7: alarm - 5A / 250 Vac

nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp; O8: redundancy - 5A / 250 Vac

USB Interface: Compatible with the USB 2.0 Full-Speed Module (USBFS) standard;

Flash drive data format (FAT32 file system, 32GB maximum capacity)

RS-485 communication: RS485 Sitrad: non isolated

Product size (WxLxD): 11.81 x 3.54 x 1.57 in